Reconstituted versus dry alfalfa hay in starter feed diets of Holstein dairy calves: Effects on feed intake,feeding and chewing behavior,feed preference,and health criteria

We investigated the effect of reconstitution of alfalfa hay on feeding and chewing behavior, sorting activity, and health status using 20 neonate Holstein male calves (3 d of age; 40.3 ± 1.30 kg of body weight) that were assigned randomly to 2 treatments, a starter feed containing either 10% dry (AH) or reconstituted alfalfa hay (RAH), each consisting of 10 calves. Alfalfa hay was reconstituted with water 24 h before feeding to achieve a theoretical dry mater (DM) content of 20%. Both starter diets had the same ingredients and nutrient compositions but differed in their DM content (90.9 vs. 66.6% DM for AH vs. RAH, respectively). Calves were weaned on d 50 and remained in the study until d 70. Reconstitution of alfalfa hay increased the percentage of particles retained on 8- and 1.18-mm sieves, but reduced feed materials retained on the bottom pan. Feeding RAH tended to increase meal frequency (preweaning) and increased meal duration (pre- and postweaning), and thereby increased time devoted to eating without affecting nutrient intake. Calves fed RAH tended to have lower eating rate during the pre- and postweaning periods. Tendencies to concurrent increase in rumination frequency and rumination duration in calves fed RAH increased time devoted to ruminating during the preweaning period; however, a tendency to longer rumination duration did not affect ruminating time during the postweaning period. Calves fed RAH spent less time resting and standing and more time drinking during the postweaning period. Non-nutritive oral behaviors were not affected by treatment during the pre- and postweaning period. Feeding RAH decreased sorting of particles retained on 8-mm sieve compared with AH; however, calves in both treatment groups sorted for particles retained on 8- and 1.18-mm sieves and against the feed materials retained on the bottom pan. Crude protein and neutral detergent fiber intakes of particles retained on the both 8- and 1.18-mm sieves increased in calves fed RAH versus AH, with no changes in intake of nutrients retained on the bottom pan. Calves fed AH were more susceptible to develop diarrhea (odds ratio = 2.02) and pneumonia (odds ratio = 4.74) and thereby had lower chances of being treated. We found no difference between treatment groups for frequency and medication days of diarrhea; however, calves fed RAH experienced fewer days with diarrhea. Furthermore, frequency and number of days with pneumonia and administration of medication were greater for calves fed AH compared with calves fed RAH. Blood concentrations of total protein and globulin tended to be higher in calves fed RAH compared with calves fed AH. Overall, feeding RAH increased time devoted to eating by increasing meal frequency and meal duration but did not affect feed intake due to lower eating rate. Calves in both treatment groups exhibited feed sorting at the extent to which they balanced intake of nutrients and met their nutritional needs. Calves, in general, were healthy, but it seems that feeding a diet containing reconstituted alfalfa hay has a potential health-promoting effect, possibly through reducing diet dustiness and improving immune status.     

Process design and techno‐economic analysis of ethyl levulinate production from carbon dioxide and 1,4‐butanediol as an alternative biofuel and fuel additive

Carbon dioxide capture, utilization, and storage (CCUS) is one of the promising negative emission technologies (NET). Within various CCUS routes available, CO₂ conversion into fuels is one of the attractive options. Currently, most of CO₂ conversion into fuels requires hydrogen, which is expensive and consume large energy to produce. Hence, a different route of producing fuel from CO₂ by utilizing 1,4‐butanediol as the raw material is proposed and evaluated in this study. This alternative route comprises production of levulinic acid from the reaction between CO₂ and 1,4‐butanediol and production of ethyl levulinate, an alternative biofuel and biofuel additive, via an esterification reaction of levulinic acid with ethanol. The process is designed and simulated according to the available data and evaluated in terms of its technical features. Because of the unavailability of reaction data for synthesis of levulinic acid from 1,4‐butanediol and CO₂, several assumptions were taken, which may implicate the accuracy of the studied design. This technical evaluation is followed by cost estimations and sensitivity analysis. Because of the free CO₂, the profitability of the plant depends strongly on the prices of the other chemicals and the price difference between 1,4‐butanediol (raw material) and ethyl levulinate (product). Monte Carlo simulation indicates that the proposed plant will always be profitable if the ethyl levulinate is slightly more expensive than the 1,4‐butanediol, highlighting that the process of producing ethyl levulinate from CO₂ is economically profitable. Future research should be directed towards a catalytic system that can effectively convert CO₂ into levulinic acid, by‐products produced from the two reaction steps, and reduce the excess ethanol used in the second reaction.     

A comprehensive review on bioinspired solar photovoltaic cells

Researchers have derived inspiration from the biophotosynthetic structures in nature and have started to synthesize the modified bioinspired solar cells copying the evolved organic and inorganic material properties. One of the highlighted examples of bioinspired photo voltaic (PV) cells is the astonishing achievement of an increase in the absorption of integrated sunlight waves in unpatterned solar cells simulated from the wings of the butterfly. Further, deployment possibilities of incorporating flexible cells on flat or curved surfaces for optimizing performance are also under progress. This article mainly discusses the recent concepts of bioinspired solar cells at the research and development level with the prospects and challenges that lie ahead in the upcoming field of photovoltaic renewable energy cell technology. Different potential materials found suitable for bioinspired solar cells construction are reviewed with their particular challenges.     

Integrated study of experiment and first‐principles computation for the characterization of a corium type ZrO8 complex in a Zr‐doped fluorite UO2

We, for the first time, observe ZrO₈ complex in Zr‐doped UO₂, which is a corium structure, using experimental characterization integrated with first‐principle computational validation. Atomic level structure of U_1?yZr_yO₂ pellets (y = 0.01, 0.03, 0.05, and 0.1) is identified using Raman spectroscopy measurement and X‐ray diffraction pattern analysis. The lattice constants shrink with increasing Zr doping levels, which consistently represents in the positive shift of T_2g Raman vibration peak around 445 cm^?1. More interestingly, conventionally unknown new Raman peak appears around 598 cm^?1, which has not been observed in neither a pure ZrO₂ nor UO₂ doped with tetravalent elements other than Zr. We unveil that the new peak originates from ZrO₈‐type complex formed on the fluorite UO₂. Our study provides precise understanding on the formation mechanisms and material properties of the corium in the hypervalent oxide.     

Nitrogen‐doped self‐shrinking porous 3D graphene capacitor deionization electrode

Traditional three‐dimensional (3D) graphene has a large pore structure, which makes the graphene structure not well interact with the anion and cation during the desalination process, thereby restricting the capacitive deionization (CDI) ability of the 3D graphene. In this work, we prepared a nitrogen‐doped self‐shrinking porous 3D graphene electrode by adding a pyrrole monomer to a graphene oxide solution, which was then applied to a CDI electrode. The results show that the electrochemical performance of the as‐prepared nitrogen‐doped self‐shrinking porous 3D graphene (NSPG) is significantly improved. Compared with traditional 3D graphene, NSPG has a denser pore structure with a larger specific surface area, thus exhibiting a good CDI performance: The NSPG electrode has an electroadsorption capacity of 13.16 mg/g.     

Surface‐modified carbon black derived from used car tires as alternative,reusable, and regenerable catalysts for H2 release studies from sodium borohydride methanolysis

Carbon black (CB) obtained from used car tire rubbers were treated with concentrated sulfuric and nitric acids. The oxidized CB (CB‐COO‐Na⁺) is subsequently modified with epichlorohydrin (ECH) and amines including polyethylene imine (PEI). These modified CBs such as CB‐PEI are used as metal‐free catalysts in methanolysis of sodium borohydride (NaBH₄) to produce hydrogen. The hydrogen generation rate (HGR) of 3089 ± 44.69 mL.min^‐1.g^‐1 is accomplished at room temperature with CB‐PEI‐hydrochloric acid (HCl) catalyst. The resulting activation energy of 34.7 kJ/mol for the temperature range of ?20°C to +30°C compares favorably to most of alternative catalysts reported in literature while reaction catalyzing capabilities of CB‐PEI‐HCl particles extend to the subzero temperature range (?20°C‐0°C). The reuse and regeneration studies conducted for the CB‐PEI‐HCl catalyst showed that these catalysts do provide complete conversion at every use up to five consecutive runs and retain 50 ± 2.5% of the original hydrogen generation rate at the fifth consecutive reuse. The CBs‐based catalysts are fully regenerated with HCl treatment.     

Computational screening of anode materials for potassium‐ion batteries

Potassium ion batteries (PIBs) are promising alternatives to Li‐ion batteries due to the abundance of potassium. However, the development of PIBs is in its early stages, and only a few anode materials have been reported. Herein, we explored anode materials for PIBs using high‐throughput computational screening. The alloying and conversion reactions of prospective anode materials were investigated using the Materials Project database. Grand potential diagrams were obtained to examine the reaction potential and theoretical capacity of the anode materials. Calculation results indicated that P, As, Si, and Sb anodes exhibited high theoretical capacities. In addition, the screening results revealed that phosphides generally exhibit a lower reaction potential compared with those of sulfides and oxides. A total of 18 binary compounds that exhibited a high theoretical capacity and a low reaction potential (greater than 450 mAh/g and 0.7 V) were identified as promising anode materials for PIBs. In particular, ZnP₂, CuP₂, SiP, NiP₃, CoP₃, V₃S₄, Nb₃S₅, Bi₂O₃, and Ga₂O₃ exhibited high theoretical capacities.     

Effect of agitation pretreatment on anaerobic digestion of swine manure

This study evaluated the effect of mechanical agitation pretreatment on anaerobic digestion (AD) of swine manure (SM). The results showed a remarkable increase in soluble polysaccharides, soluble proteins, and soluble chemical oxygen demand (SCOD) by 82.42%, 121.17%, and 114.89%, respectively, after the SM being agitated for 22 h. No improvement in the volatile fatty acids (VFAs) yield was observed during the agitation pretreatment. Apparently, agitation significantly accelerated the hydrolysis of SM, while it did not seem to enhance the acidification step. Batch AD experiments showed an improved accumulative methane yield by 77.89% with the pretreated SM compared to raw SM.     

Striking Patterns: Contemporary Ikat Design and Its Future

This review presents the results of a conference on ikat textiles organized in the context of the exhibition Striking Patterns: Global Traces in Local Ikat Fashion at the Museum der Kulturen Basel, Switzerland (October 2016 to March 2017). Academics and professional experts, some of them working for NGOs, debated often neglected potentialities as well as the future of contemporary ikat design and other intricately patterned handwoven textiles: the significance of new patterns; intellectual property rights; and educational encouragement. The general focus lay on the controversially perceived innovation of textile patterns in Indonesia and Timor-Leste. We will here present the main arguments of the discussion and our own suggestions for further research.